Programmer description

CEE-Team programmer is designed for reading / writing microcontrollers and memory chips which are mainly used in automotive electronics. Sometimes when working with automotive electronics is necessary to read and write chip microcontrollers and memory not via the diagnostic connector. In this case, you can use CEE-Team Programmer. Currently programmer supports microcontrollers NECRenesas V850, 78K0, 78K0S.

List of supported microcontrollers:

  • uPD70F3333
  • uPD70F3334
  • uPD70F3335
  • uPD70F3336
  • uPD70F3340
  • uPD70F3341
  • uPD70F3342
  • uPD70F3343
  • uPD70F3350
  • uPD70F3351
  • uPD70F3352
  • uPD70F3353
  • uPD70F3344
  • uPD70F3345
  • uPD70F3346
  • uPD70F3347
  • uPD70F3348
  • uPD70F3349
  • uPD70F3354
  • uPD70F3355
  • uPD70F3356
  • uPD70F3357
  • uPD70F3358
  • uPD70F3364
  • uPD70F3365
  • uPD70F3366
  • uPD70F3367
  • uPD70F3368
  • uPD70F3370A
  • uPD70F3371
  • uPD70F3372
  • uPD70F3373
  • uPD70F3374
  • uPD70F3375
  • uPD70F3376A
  • uPD70F3377A
  • uPD70F3378
  • uPD70F3379
  • uPD70F3380
  • uPD70F3381
  • uPD70F3382
  • uPD70F3383
  • uPD70F3384
  • uPD70F3385
  • uPD70F3421
  • uPD70F3422
  • uPD70F3423
  • uPD70F3424
  • uPD70F3425
  • uPD70F3426A
  • uPD70F3427
  • uPD70F3433
  • uPD70F3634
  • uPD70F3735
  • uPD70F3736
  • uPD70F3737
  • uPD70F3738
  • uPD70F3792
  • uPD70F3793
  • uPD70F3794
  • uPD70F3795
  • uPD70F3796
  • uPD70F3797
  • uPD70F3798
  • uPD70F3799
  • uPD70F3800
  • uPD70F3801
  • uPD70F3802
  • uPD70F3803
  • uPD70F3804
  • uPD70F3805
  • uPD70F3806
  • uPD70F3807
  • uPD70F3808
  • uPD70F3838
  • uPD70F3839
  • uPD70F3840
  • uPD70F3841
  • uPD70F3842
  • uPD70F3843
  • uPD70F3844
  • uPD70F3747
  • uPD70F3750
  • uPD70F3752
  • uPD70F3755
  • uPD70F3757
  • uPD70F3713
  • uPD70F3714

 

Programmer features:

  • Reading the contents of FLASH and Data FLASH (emulated EEPROM) 
  • Writing the contents of FLASH and Data FLASH 
  • Verifying the contents of FLASH and Data FLASH
  • Erasing the contents of FLASH FLASH and Data FLASH (by blocks or completely)
  • Setting security bits
  • Blank checking
  • Reading identification data and automatic recognition of the microcontroller
  • In supported automotive modules - reading and writing the external EEPROM

 

With the software CEE-Team Special Interface programmer can be used to: 

  • switching to service mode the instrument clusters VDO on NEC microcontrollers (Software for VAG-group cars)
  • reprogramming the instrument clusters for software updates and changes the language pack. 
  • reading data from the Mercedes-Benz keys
  • reading BCM2 modules in cars Audi A4, A5, Q5, A6, A7, A8 and VW Touareg (Software for VAG-group cars)